Return to Overview

To "Settings/Registration Table"

This section explains how to activate the TPM setting.

• Before the TPM setting is activated, the System Manager must check that the default settings of the System Manger ID and System PIN (System Manger Settings) are changed. If the default settings of the System Manager ID and System PIN are not changed, user other than the administrator can backup and the TPM backup key may be taken. Since TPM key can only be backed up once, you cannot restore the TPM key.

• Backup the TPM key immediately on to the USB memory after the TPM setting is activated.

• If initialization is performed following the steps for "Initializing All Data/Settings," all of the data encrypted by the TPM key is completely erased and the TPM setting becomes inactive.

1. Press (Settings/Registration) → [Management Settings] → [Data Management] → [TPM Settings].

2. Press [Yes].

• If the TPM setting is activated, it may take longer to start the machine.

• Back To Top