Return to Overview

To "Settings/Registration Table"

The Forced Document Scan Lock/Printer Driver Document Scan Lock mode enables you to adjust the size, density, and color of dots embedded in the document.

1. Press (Settings/Registration) → [Function Settings] → [Common] → [Print Settings] → [Document Scan Lock Settings].

If Secure Watermark is activated, press [Secure Watermark/Document Scan Lock].

2. Press [Adjust TL Code] → adjust the dots.

• If you want to adjust the size of the dots:

• If you want to adjust the density of the dots:

• If you want to adjust the color of the dots:

• If you do not want to perform the above operation, proceed to next step.

• If you want to adjust the size of the dots:

• Press [+] or [-] to set the size of the dots.

The appropriate dot size differs according to the environment, the content of the document, or the content of the file. We recommend that you check documents embedded with a TL code to see whether you can correctly analyze the tracking information and whether the TL code helps restrict copying.

• Any value from 1 to 7 may be used.

• If you want to adjust the density of the dots:

• Select [Standard] or [Rough].

If there are many illustrations or images in the document or file, we recommend that you select [Standard].

• If you want to adjust the color of the dots:

• Select [Magenta] or [Black].

If there are dark colored illustrations or images in the document or file, we recommend that you select [Black].

3. Press [OK].

• If you want to return each value of TL code to the default factory setting, press [Initialize] → [Yes].

• Back To Top