Print > Setting the Machine (PS/PCL/UFR II Printer) > Detecting and Installing Drivers that Support Functions Specified on the Machine into Your Computer
*
Detecting and Installing Drivers that Support Functions Specified on the Machine into Your Computer

To "Settings/Registration Table"

From the machine, you can specify functions suitable for the fax board or printer kit installed in the machine. From your computer, you can detect and install drivers that are compatible with the specified functions.

Remark
  • The PDL Selection (PnP) function is displayed only when at least two of the following options are available for use.
  • When the PCL Printer Kit or PS Printer Kit is activated.
  • When the optional fax board is installed.
  • If the desired driver is not in your computer, detection and installation cannot be performed.
  • To specify Restrict Printer Job settings, it is necessary to log in as an administrator. For information on the types of administrators, see "Administrator Settings" in "Security."

  1. Press (Settings/Registration) → [Function Settings] → [Printer] → [PDL Selection (Plug-n-play)].
  1. Select the button for the function that is applicable to Plug and Play settings → press [OK].

The displayed function buttons may differ, depending on the optional equipment that is attached.

  • Changes are only effective after you restart the machine (the main power switch is turned OFF, and then back ON). For instruction on restarting (turning the main power switch OFF and then ON) the machine, see "Before You Start Using This Machine."

  • Back To Top