Return to Overview

To "Settings/Registration Table"

You can store image forms and superimpose them on the output using the Superimpose Image mode in the Copy and Access Stored Files functions. For instructions on using the Superimpose Image mode, see "Copy" and "Access Stored Files."

• Up to 100 image forms can be stored. However, this number varies depending on the capacity of the hard disk.

• Be sure to place the original that contains the image form on the platen glass. It is not possible to scan an image form from the feeder.

• Image forms can also be retrieved from a personal computer and stored in the machine.

• To select an A or B series paper size, press [A/B-size].

• For instructions on entering characters, see "Basic Operations."

• If you press [OK] without entering any characters, the machine automatically assigns the image form a name using the year, month, day, and time the image form was stored.

1. Press (Settings/Registration) → [Function Settings] → [Common] → [Print Settings] → [Register Form].

• To register image form:

• To check the details of the image form:

• To delete the image form:

• To register image form:

• Press [Register].

• Select the size of the original that contains the image form → press [Next].

• Set the desired scan settings.

If you want to change the zoom ratio, press [Copy Ratio]. (See "Copy" and "Scan and Store.")

If you want to change the scan density, press [Density].

If you want to select the image quality for scanning, press [Original Type]. (See "Copy.")

If you want to change the sharpness, press [Sharpness]. (See "Copy" and "Scan and Store.")
If you want to set the Nega/Posi mode, press [Nega/Posi]. (See "Copy" and "Scan and Store.")

If you want to assign a name to the image form, press [Form Name] → enter a name → press [OK].

• Place the original that contains the image form on the platen glass → press (Start).

• To check the details of the image form:

• Select the desired image form → press [Details].

To check the image of the stored form, print the form by pressing [Check Print]. (See "Copy" and "Access Stored Files.")

• Check the detailed information → press [Close].

If you want to change the name of the image form, press [Rename Form].

• To delete the image form:

• Select the image form that you want to delete → press [Delete].

• Press [Yes].

• Back To Top