|
      0KCF-0A0
      Timer Settings
       
      All the settings about the timer are listed with short descriptions. Default settings are marked with a dagger ().
      NOTE
      Asterisks (*)
      Settings marked with "*1" have different defaults depending on the country or region of purchase.
      Settings marked with "*2" cannot be exported or imported.
      Date/Time Settings
      Specify date and time settings, including the date format and the 12- or 24-hour clock display setting. The date and time that are printed on each fax document, report, and list are determined by these settings.
      Date Format*1
      Select the date format (order of year, month, and day).
      YYYY MM/DD
      MM/DD/YYYY
      DD/MM YYYY
      Time Format
      Select the 12- or 24-hour clock display setting.
      12 Hour (AM/PM)
      24 Hour
      Current Date/Time Settings*2
      Set the current date and time. Use / to move the cursor, and use the numeric keys or / to specify the date and time or switch between <AM>/<PM>.
      IMPORTANT
      Set <Time Zone> before setting the current date and time. If the <Time Zone> setting is changed, the current date and time are also changed accordingly.
      NOTE
      The current date and time cannot be changed for 1 hour after daylight saving time is in effect.
      Time Zone*1
      Select the time zone. If the time zone setting is changed, the values set in <Current Date/Time Settings> are also changed accordingly.
      UTC-12:00 to UTC-5:00 to UTC+12:00
      NOTE
      UTC
      Coordinated Universal Time (UTC) is the primary time standard by which the world regulates clocks and time. The correct UTC time zone setting is required for Internet communications.
      Daylight Saving Time Settings*1
      Enable or disable daylight saving time. If you enable it, specify the dates from which and to which daylight saving time is in effect.
      Off
       
      On
      Start: Month, Week, Day
      End: Month, Week, Day
      Auto Reset Time
      If a key is not pressed for a specified period of time, the screen and the settings are initialized to display the default screen (Auto Reset). Specify the period of time after which Auto Reset is performed. Select <0> to disable the Auto Reset function. Auto Reset is not performed in such cases as follows:
      The setting menu screen is displayed.
      The machine is processing a job, such as when scanning a document.
      An error message is displayed and the error indicator is blinking (Auto Reset is performed when the error does not prevent user's operation.)
      0 (Auto Reset is disabled.)
      1 to 2 to 9 (min.)
      NOTE
      The screen displayed after the Auto Reset is performed can be selected in <Function After Auto Reset>.
      Function After Auto Reset
      Select whether to return the display to the default screen after Auto Reset is performed. If <Default Function> is selected, the main screen of the function selected in <Default Screen after Startup/Restoration> is displayed (Default Screen after Startup/Restoration). If <Selected Function> is selected, the display returns to the main screen of the function that was selected.
      Default Function
      Selected Function
      Auto Sleep Time
      If the machine has not been operated or has had no data to process for a specified period of time, the machine enters sleep mode to save energy consumption (Auto Sleep). Specify the period of time after which auto sleep is performed. Auto Sleep is not performed when the setting menu is displayed. It is recommended to use the factory-installed settings for this item. Entering Sleep Mode
      3 to 5 to 240 (min.)
      Auto Offline Time
      If a key has not been pressed for a specified period of time after the screen below is displayed (the machine is set online for scanning), the machine automatically becomes offline. Specify the time period at which the machine becomes offline. You can also set the machine to remain online.
      0 (The machine remains online.)
      1 to 5 to 60 (min.)