e-Manual TopContentsHelpGlossary
Category
Top » Setting Menu List » Contents of the Menu Options » Adjustment/Maintenance

Category Top

Printing and Viewing the Current Settings

Setting Up the Menu Options

Contents of the Menu Options

Network Settings

Preferences

Timer Settings

Common Settings

Copy Settings

Fax Settings 

Scan Settings

USB Direct Print Settings

Printer Settings

Adjustment/Maintenance

System Settings

Initialize Menu

Collapse all|Expand all
Adjustment/Maintenance
07K4-0S3
NOTE
About the menu options in the following chart
Default settings are highlighted in bold.
Copy Image Adjustment
You can adjust copy images.
"Correcting Copy Images"
Printer Density
You can adjust the density when making copies, printing incoming faxes, printing from memory devices or printing reports.
"Adjusting the Density"
Toner Saver Mode
Specify whether to conserve the amount of toner used for copying and faxing.
Off, On
"Using the Toner Saver Mode"
Black Text Processing for Color
Adjusts the value for determining whether to output black text on color documents as B&W or color.
Feeder: -3 to 0 to +3
Platen Glass: -3 to 0 to +3
"Adjusting Black Text in Color Documents (Black Text Processing Adjustment in Color Documents)"
Special Processing
Settings
Descriptions
Special Mode U

Due to the paper type (e.g. heavy paper) or usage conditions (e.g. dry conditions), toner smudges and spatters appear on the output. When this occurs, set the setting to ON.
Off, On
"Special Mode"
Special Mode V

Paper (the printed side) curls when damp paper is used to print. When this occurs, change the setting.
Off, Mode 1, Mode 2
"Special Mode"
Special Mode X (only for media printing and printing from PS/PCL printer driver)
Toner smudges and spatters appear on the output, due to the paper type or usage conditions. When this occurs, change the setting.
Off, Mode 1, Mode 2, Mode 3
"Special Mode"
Special Mode Z (only for copying)
Toner smudges and spatters appear on the output, due to the paper type or usage conditions. When this occurs, change the setting.
Off, Mode 1, Mode 2, Mode 3
"Special Mode"
Special Mode B
Toner smudges and spatters appear on the output, when the toner cartridge was replaced recently, or the machine has not printed anything for an extended period of time. When this occurs, change the setting.
Off, Mode 1, Mode 2, Mode 3
"Special Mode"
Special Mode C (only for printing received fax and report printing)
Toner smudges and spatters appear on the output, due to the paper type or usage conditions. When this occurs, set the setting to ON. In addition, the machine runs more quietly in the middle of a print run when this setting is set to ON.
Off, On
"Special Mode"
Special Mode D
Toner smudges and spatters appear on the output, due to the paper type or usage conditions. When this occurs, set the setting to ON. In addition, the machine runs more quietly in the middle of a print run when this setting is set to ON.
Off, On
"Special Mode"
Clean Fixing Unit
If black streaks appear on printed paper, clean the fixing unit when replacing toner cartridges.
"Cleaning the Fixing Unit"
Clean Feeder 
If your documents have black streaks or appear dirty due to pencil lead on the roller, clean the feeder.
"Cleaning the Feeder Automatically "