e-Manual
|
Top ContentsHelpGlossary |
||
|---|---|---|---|
|
Category
|
|
Category Top
Setting the System Manager InformationAttention (Specifying the System Manager Information)Registering the Name of the Machine and Location Specifying the Setting for Department ID ManagementRegistering DepartmentsEditing DepartmentsActivating the Department ID ManagementSpecifying Whether or Not to Receive a Print Job from an Unknown IDChecking or Clearing the Count InformationSpecifying Keys and Certificates/CA CertificatesGenerating Keys and CertificatesInstalling Keys and Certificates/CA CertificatesVerifying Keys and Certificates/CA CertificatesRegistering Keys and Certificates/CA CertificatesDeleting Keys and Certificates/CA CertificatesSpecifying SSLSetting IEEE802.1X AuthenticationSetting TLS Authentication InformationSetting TTLS/PEAP Authentication InformationSwitching On/Off for IEEE802.1X AuthenticationChecking Error Information for IEEE802.1X AuthenticationAttention (IEEE802.1X Authentication)Entering PIN for Printing (Secure Printing) Setting Secure PrintingPrinting by Secure PrintingConfiguring the Remote UI
Restricting Network ConnectionsRestricting Sending/Receiving to/from Specific IP AddressesRestricting Sending/Receiving to/from Specific MAC AddressesMonitoring/Controlling Devices by SNMP (SNMP Setting)Setting SNMPv1Setting SNMPv3Obtaining Printer Management Information from HostSetting the Permission for HTTP CommunicationsSetting Protocol Port NumbersSetting the Dedicated PortRestricting to Specify Destinations and Use the Sending Functions Setting a PIN for the Address BookRestricting Destinations that Can Be SpecifiedRestricting to Send Faxes from Your Computer Restricting Sending from Job HistoryConfirming the Entered Fax Number Restricting Sequential BroadcastsSpecifying Display Settings for the Job HistoryRestricting USB Port or USB Memory UsageRestricting External Device Connections via USBRestricting Storing of Data in Memory MediaRestricting Printing of Data in Memory Media|
IMPORTANT
|
|
To set SNMPv3
You need to activate SSL features in advance.
|
|
NOTE
|
|
SNMPv3 settings
<SNMPv3 Settings> Details can be set only via Remote UI.
|
|
(1)
|
Select the [Use SNMPv3] check box.
|
|
(2)
|
Select the [Enable User] check box.
|
|
(3)
|
Specify the SNMPv3 protocol.
|
|
[Use SNMPv3]
|
When the check box is selected, you can use SNMPv3 protocol.
|
||||||
|
[User Name]
|
Enter a user name.
|
||||||
|
[MIB Access Permission]
|
Specify MIB access authority. When both reading and writing is permitted, a user can access this product from a computer on the network and change settings.
|
||||||
|
[Security Setting]
|
Specify securities.
|
||||||
|
[Authentication Algorithm]
|
Select an algorithm to be used for authentication.
To change the password, select the [Change Password] check box and enter 6 to 16 alphanumeric characters in [Authentication Password] and [Confirm].
|
||||||
|
[Encryption Algorithm]
|
Select an algorithm to be used for encryption.
To change the password, select the [Change Password] check box and enter 6 to 16 alphanumeric characters in [Encryption Password] and [Confirm].
|
] (Menu).
] or [
] and press [OK].
] (Log In/Out).
] or [] and press [OK].
] or [] and press [OK].
] or [] and press [OK].
|
<Off>
|
SNMPv3 protocol is not available.
|
|
<On>
|
SNMPv3 protocol is available.
|
] (Menu) to close the menu screen.| © CANON Inc. 2012 All Rights Reserved. | Disclaimer CopyrightTrademarksOffice LocationsUSRM2-1719 (00) |
|---|