e-Manual TopContentsHelpGlossary
Category
Top » Copy » Copying by Saving Paper

Category Top

Basic Copy Operations

Attention (Combination of Copy Settings)

Checking and Canceling Copy Jobs/Checking Copy Job History

Checking and Canceling Copy Jobs

Checking Copy Job History

Selecting Copy Papers

Adjusting the Density

Density Adjustment

Background

Selecting the Document Type

2-Sided Copying

Copying 1-Sided Document to 2 Sides

Copying 2-Sided Document to 2 Sides

Copying 2-Sided Document to 1 Side

Enlarging/Reducing Copies

Copying Multiple Documents onto One Sheet (N on 1)

2 on 1/4 on 1

Copying an ID Card

Attention (ID Card Copy)

Copying by Saving Paper

Collating Copies

Erasing Dark Borders and Frame Lines (Frame Erase)

Emphasizing the Outline of the Image (Sharpness)

Registering and Using Combination of Copy Settings (Mode Memory)

Registering Mode Memory

Deleting Mode Memory

Calling and Copying Mode Memory

Changing the Default Settings

Viewing Copy Settings

Collapse all|Expand all
Copying by Saving Paper
07K4-065
See "Attention (Combination of Copy Settings)" before you start copying.
Press [] (Paper Save Copy) to save paper when making a copy.
Choose one of the following four combinations of 2 on 1/4 on 1 and 2-Sided copy settings, as shown in the table below.
 
N on 1
2-Sided
Select Layout
Format Settings
Original Orientation
Original Format
2 on 1 1->2-Sided
1->2-Sided
Portrait
Book Type
4 on 1 1->2-Sided
1->2-Sided
Portrait
Book Type
2 on 1 1->1-Sided
OFF
4 on 1 1->1-Sided
OFF
IMPORTANT
Precautions on 2-Sided Copying
Do not touch your document when making 2-sided copying until the process is complete. After copying on the front side is complete, the document is partially output, reserved, and fed into the machine again for copying on the back side.
Be sure to close the sub-output tray before making 2-sided copying.
1
Set the paper switch lever correctly to fit the size of paper used for 2-sided copying.
If the lever is not set correctly, sheets may not be fed properly, or paper jams may occur.
1.
Open the lower rear cover.
2.
Set the blue-colored paper size switch lever (A) correctly.
A4:
Pull forward
Letter and legal:
Push towards the far end
3.
Close the lower rear cover.
2
Place your document.
"Placing Documents"
"Supported Document Types"
3
Press [] (Paper Save Copy).
4
Select the combination that you want to use using [] or [] and press [OK].
5
Select the document size using [] or [] and press [OK].
6
Press [] (Start).
When the document is placed on the platen glass
(1)
Place the next page and press [] (Start).
* Repeat this step until all pages are scanned.
(2)
Select <Start Copying> using [] or [] and press [OK].