e-Manual TopContentsHelpGlossary
Category
Top » Copy » Basic Copy Operations » Attention (Combination of Copy Settings)

Category Top

Basic Copy Operations

Attention (Combination of Copy Settings)

Checking and Canceling Copy Jobs/Checking Copy Job History

Checking and Canceling Copy Jobs

Checking Copy Job History

Selecting Copy Papers

Adjusting the Density

Density Adjustment

Background

Selecting the Document Type

2-Sided Copying

Copying 1-Sided Document to 2 Sides

Copying 2-Sided Document to 2 Sides

Copying 2-Sided Document to 1 Side

Enlarging/Reducing Copies

Copying Multiple Documents onto One Sheet (N on 1)

2 on 1/4 on 1

Copying an ID Card

Attention (ID Card Copy)

Copying by Saving Paper

Collating Copies

Erasing Dark Borders and Frame Lines (Frame Erase)

Emphasizing the Outline of the Image (Sharpness)

Registering and Using Combination of Copy Settings (Mode Memory)

Registering Mode Memory

Deleting Mode Memory

Calling and Copying Mode Memory

Changing the Default Settings

Viewing Copy Settings

Collapse all|Expand all
Attention (Combination of Copy Settings)
07K4-05C
You can combine and use various copy settings. This applies to Mode Memory registration and default value settings as well.
However, the following limitation is found in the setting combination.
<No. of Copies>
Nothing special.
<Density>
When <Background> is set to <Auto>, <Original Type> is changed to <Text>.
<Original Type>
If <Original Type> is set other than <Text> when <Background> is set to <Auto>, the <Auto> setting in <Background> will be cancelled.
<2-Sided>
Depending on its paper size (selected paper drawer), 2-sided copy is not available.
Depending on its paper size or paper type in the selected paper source, 2-sided copy is not available.
"Supported Document Types"
This feature cannot be combined with <ID Card Copy>.
<Copy Ratio>
When you want to copy documents in a reduction ratio different from its default value for <4 on 1>/<2 on 1>, secify the <Copy Ratio> later.
<Copy Ratio> is fixed at 100 % for <ID Card Copy>.
The frame width specified at <Erase Frame> increases/decreases according to the <Copy Ratio> setting.
<Paper>
Depending on its document size (selected paper source), 2-sided copy is not available.
<4 on 1>/<2 on 1>
If you want to copy a document in a copy ratio different from its default reduction ratio, specify the <Copy Ratio> later.
This feature cannot be combined with <Erase Frame>.
<ID Card Copy>
<Copy Ratio> is fixed at 100%.
This feature cannot be combined with either 2-Sided Copy or <Erase Frame>.
<Collate>
Nothing special.
<Erase Frame>
This feature cannot be combined with N on 1 (<4 on 1> / <2 on 1>, <ID Card Copy>).
The specified erase frame width increases/decreases according to the <Copy Ratio> setting.
<Sharpness>
Nothing special.