e-Manual TopContentsHelpGlossary
Category
Top » Setting Up the Machine » Setting up the Machine » Carrying the Machine to the Installation Location and Removing the Packing Materials

Category Top

Setting Up the Machine the Way You Want It

Setting up the Machine

Checking the Supplied Accessories

Carrying the Machine to the Installation Location and Removing the Packing Materials

Attention (Carrying the Machine and Packing Materials)

Preparing to Use the Toner Cartridge

Attention (Preparing to Use the Toner Cartridge)

Loading Paper

Connecting the Handset

Connecting the Power Cord

Attention (Connecting the Power Cord)

Turning On the Machine and Specifying the Initial Settings

Setting the Paper Size and Type

Specifying Initial Settings for the Fax Functions and Connecting the Telephone Cable

Registering the Sender Information

Selecting the Receive Mode

Connecting the Telephone Line

Selecting the method for connecting to the machine

Attention (Connecting Your Computer to the Machine)

Selecting the Driver to Be Installed

Connecting to Wireless LAN

Connecting to Wired LAN

Checking the Network Connection

Checking Network Operation

Installing the Drivers and Software

User Software CD-ROM

Installing the Laser MFP Drivers and MF Toolbox

Attention (Installing the Laser MFP Drivers and MF Toolbox)

Installing the Laser MFP Drivers on the WSD Network

Collapse all|Expand all
Carrying the Machine to the Installation Location and Removing the Packing Materials
07K4-00H
See "Attention (Carrying the Machine and Packing Materials)." in advance.
Carry the machine to the installation site and remove the packing materials. For information on the installation space, see "Installation and Handling."
1
Take the machine out of the plastic bag, and then carry the machine to the installation site.
2
Remove the unpacking manual and packing materials.
(1)
Remove the unpacking manual and packing materials from the outside of the unit.
*
Do not remove the cap (A) on the USB port at this stage. Uncap when installing for USB connection.
(2)
Remove the packing materials from the platen glass.
(3)
Remove the packing materials that are under the operation panel.
Check!
To remove the packing materials
Make sure that the following packing materials are all removed from the machine.
3
Insert the paper drawer into the machine.
Continue with the steps in the procedure below and remove the packing materials from the toner cartridge.
"Preparing to Use the Toner Cartridge"