e-Manual TopContentsHelpGlossary
Category
Top » Setting Up the Machine » Setting up the Machine » Carrying the Machine to the Installation Location and Removing the Packing Materials » Attention (Carrying the Machine and Packing Materials)

Category Top

Setting Up the Machine the Way You Want It

Setting up the Machine

Checking the Supplied Accessories

Carrying the Machine to the Installation Location and Removing the Packing Materials

Attention (Carrying the Machine and Packing Materials)

Preparing to Use the Toner Cartridge

Attention (Preparing to Use the Toner Cartridge)

Loading Paper

Connecting the Handset

Connecting the Power Cord

Attention (Connecting the Power Cord)

Turning On the Machine and Specifying the Initial Settings

Setting the Paper Size and Type

Specifying Initial Settings for the Fax Functions and Connecting the Telephone Cable

Registering the Sender Information

Selecting the Receive Mode

Connecting the Telephone Line

Selecting the method for connecting to the machine

Attention (Connecting Your Computer to the Machine)

Selecting the Driver to Be Installed

Connecting to Wireless LAN

Connecting to Wired LAN

Checking the Network Connection

Checking Network Operation

Installing the Drivers and Software

User Software CD-ROM

Installing the Laser MFP Drivers and MF Toolbox

Attention (Installing the Laser MFP Drivers and MF Toolbox)

Installing the Laser MFP Drivers on the WSD Network

Collapse all|Expand all
Attention (Carrying the Machine and Packing Materials)
07K4-00J
See "Installation" in "Important Safety Instructions."
CAUTION
Put the machine down slowly and carefully.
Be careful not to hurt your hands or fingers.
Precautions to take when closing the feeder
Be careful not to get your fingers caught. Failure to do so can cause personal injury.
Do not close the feeder forcibly. This may damage the platen glass and cause personal injury.
IMPORTANT
When installing the optional paper drawer (Drawer 2)
Refer the Starter Guide to install it.
Store the removed packing materials.
They are required when transporting the machine for relocation or maintenance.
NOTE
About the packing materials
The packing materials may be changed in form or placement, or may be added or removed without notice.