Selecting Keys and Certificates

Select keys and certificates used by SSL encrypted communication functions.

NOTE
When Selecting Keys and Certificates A key and certificate need to be generated for encrypted SSL traffic. For more information, see "Setting Keys and Certificates." About [Default Key Settings] [Default Key Settings] is only displayed when the key is not specified as use key. To prevent keys in use from being changed, [Default Key Settings] is not displayed in the following cases. [Use SSL] under [Remote UI Settings] is set to ON. [SSL] under [TCP/IP Settings] is set to On for IPP printing. If you want to set the key as use key, first disable the above settings and then set the key as use key.

NOTE

When Selecting Keys and Certificates

A key and certificate need to be generated for encrypted SSL traffic. For more information, see "Setting Keys and Certificates."

About [Default Key Settings]

[Default Key Settings] is only displayed when the key is not specified as use key.

To prevent keys in use from being changed, [Default Key Settings] is not displayed in the following cases.

[Use SSL] under [Remote UI Settings] is set to ON.

[SSL] under [TCP/IP Settings] is set to On for IPP printing.

If you want to set the key as use key, first disable the above settings and then set the key as use key.

Start the Remote UI, and then log in as Administrator.

Click [Settings/Registration].

Select [Network] from the [Preferences] menu.

Click [TCP/IP Settings].

Click [Key and Certificate...] under [SSL Settings].

Select the key to use, and then click [Default Key Settings].