 e-Manual | Top Site mapHelp |
|---|---|
 |
Category Top
Loading PaperLoading Paper into a Paper DrawerAdjusting a Paper Drawer to Hold a Different Paper SizeLoading EnvelopesLoading Pre-Punched PaperLoading Transparencies/Clear FilmLoading Tab PaperLoading Paper into the POD Deck Lite-B1 (Optional)Loading Paper into the Multi-drawer Paper Deck-B1 (Optional)Loading Paper into the Document Insertion Unit-M1 (Optional)
Replacing the Staple Cartridge (For Optional Products)Replacing the Staple Cartridge in the Stapler Unit (Finisher-AM1/Saddle Finisher-AM2)Replacing the Staple Cartridge in the Saddle Stitcher Unit (Saddle Finisher-AM2)Replacing the Staple Cartridge in the Stapler Unit (Staple Finisher-T1/Booklet Finisher-T1)Replacing the Staple Case in the Saddle Stitcher Unit (Booklet Finisher-T1)Removing Staple Waste (Finisher-AM1/Saddle Finisher-AM2)Removing Punch Waste (Puncher Unit-BS1/Puncher Unit-BT1)Removing Punch Waste (External 2/3 Hole Puncher-C1/External 2/4 Hole Puncher-C1/External 4 Hole Puncher-C1)Operating the Limited Functions ModeReplacing the Toner CartridgeReplacing the Waste Toner ContainerRoutine CleaningOriginals Cannot Be Scanned Properly (Cleaning the Platen Glass)Originals Cannot Be Scanned Properly (Cleaning Method of the Original Scanning Area)Scanned Originals Become Dirty (Manual Feeder Cleaning)Scanned Originals Become Dirty (Automatic Feeder Cleaning)Output Paper Becomes Dirty (Cleaning Inside of the Main Unit)Output Paper Becomes Dirty (Wire Cleaning)Output Paper Becomes Dirty (Roller Cleaning)Output Paper Becomes Dirty (Belt Cleaning)Streaks and Gloss Unevenness Appear on Output Paper (Refreshing the Fixing Belt)Streaks and Gloss Unevenness Appear on Output Paper (Adjusting the Fixing Belt Auto Refresh Level)Cleaning the Touch Panel DisplayConsumables| Copyright CANON INC. 2014 | Disclaimers CopyrightTrademarksThird Party SoftwareOffice LocationsUSRM2-5269-00 |
|---|
Expand All
Collapse All
Print all
Search options