Selecting the Scanner - Canon imageRUNNER ADVANCE 4051/4045/4035/4025 e-Manual

Selecting the Scanner

Before using the scanner driver for the first time, you need to select the network scanner to be used with the ScanGear Tool.

Click [

] (Start) → [All Programs] → [Color Network ScanGear] or [Network ScanGear] → [ScanGear Tool].

NOTE
For Windows 2000, click [Start] →[Programs] → [Color Network ScanGear] or [Network ScanGear] → [ScanGear Tool].

The ScanGear Tool starts.

Select the scanner.

To search for scanners automatically

To select the scanner using the IP address or host name

To search for scanners automatically

Click [Discover] → select a scanner from [Select Scanner from List] → click [Select].

NOTE
Only scanners on the same subnet (network with the same network ID) as your computer are displayed in the list.

To select the scanner using the IP address or host name

Click [Address].

Enter the IP address or host name → click [OK].

NOTE
It is possible to specify an IP address or host name outside the subnet. For a scanner connected to a network by IPv4, enter the IP address as follows: XXX.XXX.XXX.XXX (XXX is a decimal number from "0" to "255." Characters that can be used are the numbers "0" to "9" and periods (.).) For a scanner connected to a network by IPv6, enter the IP address as follows (only for Color Network ScanGear): XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX (XXXX is a hexadecimal number. Characters that can be used are the numbers "0" to "9," the letters "a" to "f" and "A" to "F," and colons (:).) Example: 3ae3:90a0:bd05:01d2:288a:1fc0:0001:10ee If the number within a segment begins with a zero (0), you can omit the zero (0) at the beginning. Example: f0f0:0001:0020:0300:1000:0100:0020:0003=f0f0:1:20:300:1000:100:20:3 If there are continuous segments consisting of zeros (0), these can be replaced by a double colon (::). However, only one continuous group of segments can be omitted. Example 1: 1234:4567:0000:0000:0000:0000:0000:9abc = 1234:4567::9abc Example 2: 1234:4567:0000:0000:f1f2:0000:0000:9abc = 1234:4567::f1f2:0:0:9abc You can specify the host name by entering it in the form "host name" only, or in the form "host name+sub-domain name+domain name." An example of host name only is: Server1234 An example of host name+sub-domain name+domain name is: Server1234.canon.com For details on how to verify the IP address or host name you have set, refer to the manual provided with the corresponding product.

NOTE

It is possible to specify an IP address or host name outside the subnet.

For a scanner connected to a network by IPv4, enter the IP address as follows:

XXX.XXX.XXX.XXX (XXX is a decimal number from "0" to "255." Characters that can be used are the numbers "0" to "9" and periods (.).)

For a scanner connected to a network by IPv6, enter the IP address as follows (only for Color Network ScanGear):

XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX (XXXX is a hexadecimal number. Characters that can be used are the numbers "0" to "9," the letters "a" to "f" and "A" to "F," and colons (:).)

Example: 3ae3:90a0:bd05:01d2:288a:1fc0:0001:10ee

If the number within a segment begins with a zero (0), you can omit the zero (0) at the beginning.
Example: f0f0:0001:0020:0300:1000:0100:0020:0003=f0f0:1:20:300:1000:100:20:3

If there are continuous segments consisting of zeros (0), these can be replaced by a double colon (::). However, only one continuous group of segments can be omitted.
Example 1: 1234:4567:0000:0000:0000:0000:0000:9abc = 1234:4567::9abc
Example 2: 1234:4567:0000:0000:f1f2:0000:0000:9abc = 1234:4567::f1f2:0:0:9abc

You can specify the host name by entering it in the form "host name" only, or in the form "host name+sub-domain name+domain name."

An example of host name only is: Server1234

An example of host name+sub-domain name+domain name is: Server1234.canon.com

For details on how to verify the IP address or host name you have set, refer to the manual provided with the corresponding product.

Confirm the Information appears under [Selected Scanner] → click [Exit].

You can click [Test Connection] to check that the selected scanner can be used.

NOTE
The ScanGear Tool cannot be started at the same time as the Color Network ScanGear/Network ScanGear driver. The window displayed may vary according to the operating system etc.