System Management Settings |
Item | Settings | Applicable Page |
System Manager Info. Settings | Specifying the System Manager Settings | |
System Mgmt. Dept. ID |
Max. 7 digits (7654321) | |
System Mgmt. Password |
Max. 7 digits (7654321) | |
System Manager Name |
Max. 32 characters | |
Device Info. Settings | Device Information Settings | |
Device Name |
Max. 32 characters | |
Location Information |
Max. 32 characters | |
Dept. ID Management |
|
Department ID Management |
Register Dept. ID/Pass. |
Registering the Department ID, Password, and Page Limit | |
Register |
||
Dept. ID |
Max. 7 characters | |
Password |
Max. 7 characters | |
Limit On/Off & Page Limit |
||
Total Print Limit |
|
|
Total Color Print Limit |
|
|
Total Black Print Limit |
|
|
Color Copy Limit |
|
|
Color Scan Limit |
|
|
Color Print Limit |
|
|
Black Copy Limit |
|
|
Black Scan Limit |
|
|
Black Print Limit |
|
|
Page Totals |
Total Prints, Total Color Print, Total Black Prints, Color Copy, Color Scan, Color Print, Black Copy, Black Scan, Black Print | Checking Counter Information |
Print List |
All, Total Print Only, Color Only, Black Only | |
All Clear |
|
Clearing the Page Total of All the Departments |
Allow Unknown ID Printing |
|
Accepting Print Jobs with Unknown IDs |
Allow Unknown ID R. Scan |
|
Accepting Scan Jobs with Unknown IDs |
Allow Black Copy Jobs |
|
Accepting B&W Copy Jobs without Entering the Department ID and Password |
User ID Management |
|
Managing User IDs |
Network Settings | ||
TCP/IP Settings |
||
IPv4 Settings |
||
IP Address Settings |
||
Manual Settings |
|
Setting IPv4 Address Manually |
IP Address |
IP Address (0.0.0.0) | |
Subnet Mask |
IP Address (0.0.0.0) | |
Gateway Address |
IP Address (0.0.0.0) | |
Obtain Automatically |
|
Setting IPv4 Address Automatically |
PING Command |
IP Address (0.0.0.0) | Checking Network Connection (IPv4) |
IP Address Range Settings |
|
Controlling Machine Access Using IPv4 Addresses |
Register |
||
Single Address |
IP Address (0.0.0.0) | Registering a Single IPv4 Address to Prohibit |
Multiple Destinations |
Max. 10 IPv4 Addresses | Registering a Range of IPv4 Addresses to Prohibit |
DNS Settings |
Setting IPv4 DNS | |
DNS Server Settings |
||
Primary DNS Server |
IP Address (0.0.0.0) | |
Secondary DNS Server |
IP Address (0.0.0.0) | |
DNS Host/Domain Name |
||
Host Name |
Max. 47 characters (Canon****** ("******" represents the last six digits of a MAC address)) | |
Domain Name |
Max. 47 characters | |
DNS Dynamic Update Set. |
|
|
IPv6 Settings |
||
Use IPv6 |
|
Setting the Use of IPv6 |
Stateless Address Settings |
|
Setting the Use of Stateless Address |
Manual Address Settings |
|
Setting IPv6 Address Manually |
Manual Address |
IP Address | |
Prefix Length |
0 to 128 (64) | |
Default Router Address |
IP Address | |
Use DHCPv6 |
|
Setting the Use of DHCPv6 |
PING Command |
||
IPv6 address |
IP Address | Checking Network Connection Using IPv6 Address |
Host Name |
Max. 47 characters | Checking Network Connection Using IPv6 Hostname |
IP Address Range Settings |
|
Controlling Machine Access Using IPv6 Addresses |
Register |
||
Single Address |
IP Address | Registering a Single IPv6 Address to Prohibit |
Multiple Destinations |
Max. 10 IPv6 Addresses | Registering a Range of IPv6 Addresses to Prohibit |
Prefix Address |
IP Address | Registering a Prefix for the IPv6 Address to Prohibit |
DNS Settings |
Setting IPv6 DNS | |
DNS Server Settings |
||
Primary DNS Server |
IP Address | |
Secondary DNS Server |
IP Address | |
DNS Host/Domain Name |
||
Use Same Host/Domain as IPv4 |
|
|
Host Name |
Max. 47 characters (Canon****** ("******" represents the last six digits of a MAC address)) | |
Domain Name |
Max. 47 characters | |
DNS Dynamic Update Set. |
|
|
Manual Address Regist. |
|
|
Register Stateful Address |
|
|
WINS Configuration |
|
Setting WINS |
WINS Server Address |
IP Address (0.0.0.0) | |
LPD Print Settings |
|
Settings from the Machine (Printing from PC/PC Fax) |
RAW Print Settings |
|
|
Use Bidirectional |
|
|
WSD Print Settings |
||
Use WSD Print |
|
|
Use WSD Browsing |
|
|
Use Multicast Discovery |
|
|
SNTP Settings |
|
Setting SNTP |
Polling Interval |
1 to 48 hours (24) | |
NTP Server Address |
Max. 47 characters | |
NTP Server Check |
Start | |
Use PASV Mode for FTP |
|
Setting PASV Mode for FTP |
FTP Extension |
|
Setting FTP Extension |
Certificate Settings |
||
Key and Certificate List |
Installing and Registering a Key and Certificate | |
Certificate Details |
Displays Version, Serial No., Signature Algorithm, Issue Destination, Validity Start, Validity End, Issuer, Public Key, Cert Thumbprint | |
Erase |
|
|
Display Use Location |
Displays what the key pair is being used for | |
CA Certificate List |
Checking and Deleting a Key and Certificate | |
Certificate Details |
Displays Version, Serial No., Signature Algorithm, Issue Destination, Validity Start, Validity End, Issuer, Public Key, Cert Thumbprint | |
Erase |
|
|
Register Key and Cert. |
Installing and Registering a CA Certificate | |
Register |
||
Key Name |
Max. 24 characters | |
Password |
Max. 24 characters | |
Erase |
|
|
CA Cert. Registration |
Checking and Deleting a CA Certificate | |
Register |
|
|
Erase |
|
|
Use HTTP |
|
Setting the Use of HTTP |
Port Number Settings |
Setting Port Number | |
LPD |
1 to 65535 (515) | |
RAW |
1 to 65535 (9100) | |
HTTP |
1 to 65535 (80) | |
SMTP Receive |
1 to 65535 (25) | |
POP3 Receive |
1 to 65535 (110) | |
FTP Sending |
1 to 65535 (21) | |
SMTP Send |
1 to 65535 (25) | |
SNMP |
1 to 65535 (161) | |
WSD |
1 to 65535 (3702) | |
Proxy Settings |
|
Setting Proxy |
HTTP Proxy Server Address |
Max. 128 characters | |
HTTP Proxy Server Port Number |
1 to 65535 (80) | |
Use Proxy in Same Domain |
|
|
Use Proxy Authentication |
|
|
User Name |
Max. 24 characters | |
Password |
Max. 24 characters | |
Receiving MAC Address |
|
Limiting Machine Access to a Certain MAC Address |
Confirm Dept. ID Password |
|
Confirming the Department ID and Password |
SMB Settings |
|
Setting Up the Send Files Function of the Machine |
Server Name |
Max. 15 characters | |
Workgroup Name |
Max. 15 characters | |
Comment |
Max. 48 characters | |
Use LM Announce |
|
|
SNMP Settings |
|
Setting SNMP |
Community Name 1 |
Max. 15 characters (public) | |
Community Name 2 |
Max. 15 characters | |
Writable SNMP1 |
|
|
Writable SNMP2 |
|
|
Printer Mgt. Info from Host |
|
|
Dedicated Port Settings |
|
Setting Dedicated Port (IPv4 Only) |
Startup Time Settings |
0 to 300 seconds (0) | Setting Startup Time |
Ethernet Driver Settings |
Setting Speed and Duplex | |
Auto Detect |
|
|
Communication Mode |
|
|
Ethernet Type |
|
|
E-mail/I-Fax |
||
SMTP Receive |
|
When the Machine's Own SMTP Receiving Function is Used |
POP |
|
When a POP Server is Used |
SMTP Server |
Max. 47 characters | |
E-mail Address |
Max. 64 characters | |
POP Server |
Max. 47 characters | |
POP Address |
Max. 32 characters | |
POP Password |
Max. 32 characters | |
POP Interval |
0 to 99 minutes (0) | |
Authentication/ |
||
POP Auth. Before Send |
|
When POP before SMTP Authentication is Used |
SMTP Authentication |
|
When SMTP Authentication is Used |
Display Authentication Screen*2 |
|
|
Carry Over Authentication*2 |
|
|
User Name |
Max. 64 characters | |
Password |
Max. 32 characters | |
IEEE802.1X Settings |
|
Selecting the IEEE802.1X Authentication Method |
Login Name |
Max. 24 characters | |
Use TLS |
|
|
Key and Certificate |
||
Set as Default Key |
|
|
Certificate Details |
Displays Version, Serial No., Signature Algorithm, Issue Destination, Validity Start, Validity End, Issuer, Public Key, Cert Thumbprint | |
Display Use Location |
Displays what the key pair is being used for | |
Use TTLS |
|
|
TTLS Set. (TTLS Internal Protocol) |
|
|
Use PEAP |
|
|
LoginName as UserName |
|
|
User Name |
Max. 24 characters | |
Password |
Max. 24 characters | |
Communication Settings | ||
E-mail/I-Fax Settings |
||
Send Data Size Limit |
0 to 99 MB (3) | Specifying the Maximum Data Size for Sending E-Mails |
Divide TX Data Oversize |
|
Dividing the Data for Sending E-Mails |
Default Subject |
Max. 40 characters (Attached Image) | Registering a Subject Line for Your E-Mails |
Fax Settings*1 |
||
Send Start Speed |
33600bps, 14400bps, 9600bps, 7200bps, 4800bps, 2400bps | Send Start Speed (Fax) |
Receive Start Speed |
33600bps, 14400bps, 9600bps, 7200bps, 4800bps, 2400bps | Receive Start Speed (Fax) |
Memory Lock Settings |
|
Receiving Documents in Memory without Printing Out (Memory Lock Reception) (Fax) Receiving Documents in Memory without Printing Out (Memory Lock Reception) (E-Mail) |
Memory Lock Password |
Max. 7 digits | |
Report Print |
|
|
Memory Lock Time Settings |
|
|
Select Country/Region |
Brazil, Canada, United States, Mexico, Others | Starter Guide "Set Up the Machine" |
Forwarding Settings | ||
Register |
Storing Forwarding Settings (Fax) Storing Forwarding Settings (E-Mail) |
|
Forwarding Cond. Name |
Max. 50 characters | |
Forwarding Conditions Settings |
|
|
Forwarding Condition |
disregard, Do Not Exist*, equals, differs from, begins with, ends with, contains, does not contain * Only when <Fax> is selected in <Forwarding Conditions Settings>. |
|
Forwarding Destination |
Select from the list of registered addresses | |
File Format |
When <Fax> is selected in <Forwarding Conditions Settings>:
|
|
Divide Pages |
|
|
Forward w/o Condition |
When Forwarding Destinations Do Not Match the Forwarding Conditions (Fax) When Forwarding Destinations Do Not Match the Forwarding Conditions (E-Mail) |
|
Forwarding Without Conditions |
|
|
Forwarding Destination |
Select from the list of registered addresses | |
File Format |
When <Fax> is selected in <Forwarding Without Conditions>:
|
|
Divide Pages |
|
|
Erase |
|
Erasing Forwarding Settings (Fax) Erasing Forwarding Settings (E-Mail) |
Print List |
|
Printing Forwarding Settings (Fax) Printing Forwarding Settings (E-Mail) |
Details/Edit |
Same as <Register> | Checking/Changing Forwarding Settings (Fax) Checking/Changing Forwarding Settings (E-Mail) |
Store/Print When Fwding. | Handling Forwarding Documents (Fax) Handling Forwarding Documents (E-Mail) |
|
Print Image |
|
|
Store Image to Memory |
|
|
Remote UI |
|
Restricting the Remote UI |
Restrict the Send Function | ||
Address Book Password |
Max. 7 digits | Setting a Password for the Address Book |
Restrict New Addresses |
|
Restricting the New Address |
Allow Fax Driver TX*1 |
|
Restricting PC Faxing |
Restrict Sending From Log |
|
Restricting Recall |
Confirm Entered Fax No.*1 |
|
Confirming Entered Fax Numbers |
Restrict Seq. Broadcast |
|
Restricting Broadcasting |
Auto Online/Offline | ||
Auto Online |
|
Auto Online |
Auto Offline |
|
Auto Offline |
Register LDAP Server | ||
Register |
Registering LDAP Server | |
Server Name |
Max. 24 characters | |
Server Address |
Max. 47 characters | |
Loc. to Start Search |
Max. 120 characters | |
Port Number |
1 to 65535 (389) | |
Search Dest. Limit |
1 to 1000 (100) | |
Search Timeout |
30 to 300 seconds (60) | |
Login Information |
||
Do Not Use |
||
Server LDAP Version and Char. Code |
|
|
Use |
||
Carry Over Send Auth.*2 |
|
|
User Name |
Max. 120 characters | |
Password |
Max. 24 characters | |
Display Auth. Screen |
|
|
Server LDAP Version and Char. Code |
|
|
Use (Sec. Auth.): Ver 3 (UTF-8) |
||
Carry Over Send Auth.*2 |
|
|
User Name |
Max. 120 characters | |
Password |
Max. 24 characters | |
Domain Name |
Max. 120 characters | |
Display Auth. Screen |
|
|
Details/Edit |
Same as <Register> | Changing LDAP Server Setting |
Erase |
|
Deleting LDAP Server |
Print List |
|
Printing LDAP Server Settings |
Reg/Edit LDAP Search Attributes |
Registering/Editing LDAP Search Attributes | |
Not Registered 1 |
||
Display Name |
Max. 11 characters | |
Attribute Name |
Max. 64 characters | |
Not Registered 2 |
||
Display Name |
Max. 11 characters | |
Attribute Name |
Max. 64 characters | |
Job Log Display |
|
Checking the Job Log |
Memory Media Store Log |
|
Storing Log to USB Memory |
Register License | Enter a license key | Registering a License |
USB Device |
|
Restricting the USB Interface Port |
Dept. ID/User Name Display |
|
Displaying the Current Department ID/User Name |
PDL Selection (PnP) | UFRII LT, PCL5c, PCL6, FAX, PS3 | Detecting and Installing Drivers that Support Functions Specified on the Machine into Your Computer |
Memory Media Settings | Restricting Sending Documents to a USB Memory Restricting Printing Images from a USB Memory |
|
Store on Memory Media |
|
|
Direct Print |
|
|
Update Firmware | This function is used only when it is necessary to update the firmware. | |
Start Setup Guide |
|
Starting "Setup Guide" |
*1 Only for the Color imageRUNNER C1030iF or C1030 with the optional Super G3 FAX Board attached. |
*2 Only when Authentication at Send is activated. |