Starting "Setup Guide" |
This section describes how to start the "Setup Guide" from the Additional Functions menu. The "Setup Guide" assists you the required settings of the machine by simply following it. |
Load Paper |
Set Date and Time |
Make Fax Settings |
Connect Telephone Cables |
Adjust Color with "Auto Gradation Correction" |
Set Up Network Connection |
Finish "Setup Guide" |
|
|
If the screen appears prompting you to enter the System Manager ID and System Password, enter the System Manager ID and System Password using - (numeric keys), then press (Log In/Out). |
|
The "Setup Guide" is displayed on the display. |
Remark |
|
|
|||||
|
|
The screen explains how to operate the "Setup Guide" using the keys on the operation panel. For details on the key operation, see "Entering Information," shown above. |
Check that all the packing materials are removed from the main unit and the cartridges. If not, refer to the instruction sheet "Unpacking the Machine" and remove them all. |
The auto obtain IP address function enables the machine to get the IP address after connecting the LAN cable to the machine.
|
Do not connect the USB cable at this point even if you use the machine as a local printer by directly connecting the machine to the computer.
|
Go to "Load Paper"
|