Fax Line Settings
To use the fax on the machine, register the fax number and company or department name to be displayed/printed at the receiving party's fax machine when sending a fax. Also, set the communication channel type.
1
Press 
.
.2
Press <Function Settings> 
<Send> <Fax Settings> <Set Line>.
<Send> <Fax Settings> <Set Line>.3
Press <Line 1> <Register Unit Telephone Number>.
<Register Unit Telephone Number>.4
Enter a fax number and press <OK>.
The fax number you registered will be notified to the recipient.
5
Enter a name in <Register Unit Name> and press <OK>.
The name you registered will be notified to the recipient.
Instead of the unit name you specified, you can show or print the sender's name. Basic Operations for Sending Faxes
6
Select a line type in <Select Line Type>, press <OK>.
If you are not sure what kind of line type you are using, please contact your dealer or the sales office of your telephone company.
|
|
Configure the setting according to the fax option.You can edit the line name that is displayed in the line selection screen using <Edit Line Name for Select Line Screen>. <Send>
<Fax Settings>You can change the display of the address list according to the selected line in <Default Address List When Selecting Line>. <Send>
<Fax Settings>You can set to display a destination's phone number on the screen or report in <Set Number Display>. <Receive/Forward>
<Fax Settings>You can set to automatically switch of the incoming fax and incoming call in <Select RX Mode>. <Receive/Forward>
<Fax Settings> |