Access Stored Files > Date Printing
*
Date Printing

Prints the date onto the output.

Remark
  • For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart."
  • This mode can be used only for printing a file stored in a mail box.
  • The Print Date mode cannot be used with files with a resolution of less than 600 × 600 dpi.
  • Printing performance may not be optimal, depending on the file content and combination of settings.
  • If the Print Date mode is used with the Insertion Sheets or Job Separator mode, the date will not be printed on the inserted pages.

  1. Select the desired Mail Box.
  1. Select the file that you want to print → press [Print] → [Change Print Settings] → [Options].
  1. Press [Print Date].
  1. Set the position and orientation of the date.

Select top or bottom ([], []), or one of the four corners ([], [], [], []) for the print position.

  • If you set any two of the Page Numbering, Copy Set Numbering, Watermark Printing, or Print Date modes to print in the same position, a message asking for your confirmation is displayed when you press (Start).
  • Press [Set Details].
  • Press [X] and [Y] → press [-] or [+] to set their respective positions.
  • Press [OK].
  • Select the orientation from [Upright Image] or [Sideways Image].

Orientation:

[Upright Image]: Prints the image upright on the paper.
[Sideways Image]: Prints the image sideways on the paper.

  1. Specify the print settings for page numbers.
  • Select the size of the copy set numbers from the drop-down list.

Select the size of the page numbers from [10.5 pt], [12.0 pt], and [14.0 pt].

  • Select the color of the page numbers from the drop-down list.

You can select [Yellow], [Magenta], [Cyan], [Black], [Red], [Green], or [Blue] for the color of the date.

  • Select the date format from the drop-down list.

There are six different date formats that you can select in the drop-down list.

  • Enter the desired date using - (numeric keys).
  • If you do not specify a date, the date set in [Date/Time Settings] in [Preferences] (Settings/Registration) is printed. Confirm that the date and time settings are correct.

  1. Press [Print Type].

If you do not want to specify the print type, proceed to step 8.

  1. Select [Transparent] or [Overlay] → press [OK].

If [Transparent] is selected, you can also adjust the halftone density by pressing [Light] or [Dark].

  1. Press [OK].

  • Back To Top