Access Stored Files > Specifying the Position to Print
*
Specifying the Position to Print

You can specify the printing position when printing.

Remark
  • This mode is only available for printing files stored in the Advanced Box, Network, and Memory Media.
  • For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart."
  • This mode can be used for printing a JPEG or TIFF file.
  • As an example, the procedure to select and print a file stored in the Advanced Box is explained in this section.

  1. Select the desired Space.
  1. Display the level for the file you want to print.
  1. Select the file that you want to print → press [Print].
  1. Select the desired paper size and type → press [OK].
  1. Press [Options] → [Print Position].
  1. Select the printing position.

Details of each item are shown below.

[Auto]: If the printing position is specified for a JPEG or TIFF image, prints in the specified position. If the printing position is not specified, prints in the center position.
[Always Center]: Prints in the center, regardless of the printing position specified for a JPEG or TIFF image.
[Always Top Left]: Prints in the upper left, regardless of the printing position specified for a JPEG or TIFF image.
  1. Press [OK].

  • Back To Top