Access Stored Files > Shifting the Original Image Using the Numeric Keys
*
Shifting the Original Image Using the Numeric Keys

This mode setting enables you to shift the entire image to a position that you specify using - (numeric keys).


Remark
  • For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart."
  • This mode can be used only for printing a file stored in a mail box.
  • If you use the numeric keys to enter the shift position, the original image may be partially cut off on the print, depending on the size of the selected file, the size of the print paper, and the amount of shift specified.

  1. Select the desired Mail Box.
  1. Select the file that you want to print → press [Print] → [Change Print Settings] → [Options].
  1. Press [Shift].
  1. Press [Settings] under <Front Side> or <Back Side>.

  • Back side settings are only valid when making two-sided prints.
  1. Use - (numeric keys) to enter the shift position.
  • Select the shift direction.
  • Enter the shift value.
  • To change a value you entered, select the shift direction → enter the correct value using - (numeric keys).
  • The values for the back side can also be automatically set by selecting [Same as Front Side] or [Opposite to Front Side].
  • Example:
When the front side is set to 1 15/16" (50 mm) for the left, and 4" (100 mm) for the top.
If you press [Same as Front Side]:
1 15/16" (50 mm) for the left, and 4" (100 mm) for the top
If you press [Opposite to Front Side]:
1 15/16" (50 mm) for the right, and 4" (100 mm) for the top
  • Example: To move the original image in a diagonal direction:

  • Example: To move the original image in a diagonal direction:
  • Press the top [].
  • Enter the shift value.
  • Press the right [].
  • Enter the shift value.


  1. Press [OK].

  • Back To Top