This mode enables you to scan originals in such a way that, when printing the scanned data, the output paper can be made into a booklet. Specify the Booklet mode when printing the scanned data. (See "Booklet Mode" in "Access Stored Files.")

• This mode is only available for storing files in the Mail Box.

• For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart."

• Make sure to place originals with a vertical (portrait) orientation vertically. If these originals are placed horizontally, the even numbered pages will be printed upside down.

1. Select the desired Mail Box.

2. Place your originals → press [Scan].

3. Press [Options] → [Booklet Scan].

4. Press [Change] for the original size.

5. Select the desired original size → press [OK].

• To select an A or B series paper size, press [A/B-Size].

• [2-Sided Original] cannot be selected if STMTR is the selected original size.

If the original is two-sided, press [2-Sided Original] → select the type of two-sided original → press [OK].

Details of each item are shown below.

6. Press [Change] for the booklet layout size.

7. Select the desired booklet layout size → press [OK].

• To select an A or B series paper size, press [A/B-Size].

8. Press [OK] → [Close].

9. Press (Start).

• Back To Top