Copy > Changing the Copy (Zoom) Ratio > Reducing/Enlarging Using the Original and Copy Sizes > Making Copies with Different XY Copy/Zoom Ratios (XY Independent)
1 2 3 4 5 
Making Copies with Different XY Copy/Zoom Ratios (XY Independent)

Return to Overview

  1. Place your originals → press [Copy Ratio].
  1. Press [Set by Length].
  1. Press [XY Independent].
  1. Use the numeric keys on the touch panel display to enter values for the original size and copy size.
  • Press [X] (horizontal axis) for Original Size → enter a value.
  • Press [Y] (vertical axis) for Original Size → enter a value.
  • Press [X] (horizontal axis) for Copy Size → enter a value.
  • Press [Y] (vertical axis) for Copy Size → enter a value.
  • Press [OK].

You can enter either the width or the length of the original size. If you enter the width for the original size, make sure to enter the width for the copy size as well, and vice versa.

The machine automatically calculates the correct copy (zoom) ratio based on the values you entered; however, the original image may be cut off slightly depending on the paper size.

If the computation results in a zoom ratio less than 25% or greater than 400%, a message appears telling you that values below 25% will be set to 25%, and values above 400% will be set to 400%.

  • To specify the same copy ratio for both the horizontal (X) and vertical (Y) axes, press [XY Same Ratio].
  1. Press (Start).

  • Back To Top