Return to Overview

The Set Ratio by Length mode enables you to reduce or enlarge originals by individually entering the dimensions of the original and copy paper.

Any copy (zoom) ratio from 25% to 400% can be set.

The following two Set Ratio by Length modes are available.

• The specified sizes are converted into a copy (zoom) ratio (%) by the machine using the formula below. The result is rounded to the closest integer.
  Copy (zoom) ratio (%) = (copy size/original size) × 100

• To cancel this setting, press [Copy Ratio] → [Set by Length] → [Stop].

• For instructions on entering values in inches, see "Basic Operations."

• Making Copies with the Same XY Copy/Zoom Ratio (XY Same Ratio)

You can set the same copy (zoom) ratio for both the horizontal (X) and vertical (Y) axes.

• Making Copies with Different XY Copy/Zoom Ratios (XY Independent)

You can set different copy (zoom) ratios for the horizontal (X) and vertical (Y) axes.

• Back To Top