Return to Overview

To "Settings/Registration Table"

You can set the Scan and Store screen for scanning originals.

• Storing and Editing the Scan Setting

You can set up to nine possible combinations of scan settings and store them in a favorite button in memory. This feature is useful for storing frequently used scan settings.

• Changing the Default Settings

You can change the default settings for Scan and Store.

• The settings stored in the favorite settings buttons are not deleted, even if the power is turned OFF.

1. Set the mode to be stored → press (Settings/Registration) → [Function Settings] → [Store/Access Files] → [Common Settings] → [Scan and Store Settings].

• To store and edit the scan settings:

• To change the default settings:

• To store and edit the scan settings:

• Press [Register/Edit Favorite Settings].

• Select a favorite settings button ([M1] to [M9]).

• Press [Store].

If you select a button without settings, a screen asking for your confirmation to store the settings appears → press [Yes].

If you select a button that already has favorite settings stored in it, a screen asking for your confirmation to overwrite the previous settings appears → press [Yes].

To register a name, press [Name] → enter a new name → press [Yes].

To delete, select the favorite settings button that you want to delete → press [Delete] → [OK].

• If [Check Content] is pressed, the registered settings are displayed.

• If you press [OK] without entering any characters, the key name reverts to its current name (default M1 to M9).

• Key name is not deleted even when the favorite settings button is deleted. To change the key name, press [Name].

• To change the default settings:

• Press [Change Default Settings].

• Select [Register] or [Initialize] → press [Yes] → [Close].

If you press [Register], the current scan settings are set as the default settings.

If you press [Initialize], the default settings return to the original default settings.

• Back To Top