Return to Overview

To "Settings/Registration Table"

The Fax RX Report enables you to check whether documents were sent correctly from the sender's machine and received successfully by this machine. A Fax RX Report can be printed automatically after documents are received, and you can also set the machine to print a Fax RX Report only when a reception error occurs.

For information on the optional products required to use this function, see "Optional Products Required for Each Function (imageRUNNER ADVANCE C9075 PRO/C9065 PRO)" or "Optional Products Required for Each Function (imageRUNNER ADVANCE C7065/C7055)."

• The reports can be printed only if 11" × 17", LGL, LTR, or LTRR (plain, recycled, thin, or color paper) is loaded in a paper source whose settings in [Other] in [Paper Drawer Auto Selection On/Off] in [Function Settings] (Settings/Registration) are set to 'On'. However, if [Consider Paper Type] for [Copy] is set to 'On' in [Paper Drawer Auto Selection On/Off], you cannot print from a paper source with color paper specified. (See "Setting the Paper Drawer Auto Selection On/Off")

• For an example of a Fax RX Report, see Chapter 17, "Appendix," in Getting Started.

1. Press (Settings/Registration) → [Function Settings] → [Receive/Forward] → [Fax Settings] → [Fax RX Report].

2. Select [For Error Only], [On], or [Off] → press [OK].

Details of each item are shown below.

• Back To Top