|
To "Settings/Registration Table"
You can set the machine to store received fax/I-fax documents in Confidential Fax Inboxes, or forward them to other machines or file servers. If a received document matches the forwarding conditions, it is forwarded to the specified destination. You can also set a specified time during which received fax/I-fax documents which match the forwarding conditions are forwarded. This section explains the conditions for forwarding, and how to register, change, and delete forwarding destinations.
When the machine receives I-fax/fax documents, they are processed as shown below:
| *1 |
If the subaddress and password attached to the received document match the information registered in [Forwarding Settings] in [Function Settings] (Settings/Registration), the documents are forwarded to their forwarding destinations regardless of the reception password setting. |
| *2 |
If Store/Print Received File in [Forwarding Settings] in [Function Settings] (Settings/Registration) is set to 'On', forwarded documents are either printed or stored in the Memory RX Inbox. |
| *3 |
If the subaddress and password attached to the received document do not match the information registered in [Forwarding Settings] in [Function Settings] (Settings/Registration), the document is rejected. |
| *4 |
If [Forward w/o Conditions] is set up in [Forwarding Settings] in [Function Settings] (Settings/Registration), all received documents that do not match the specified forwarding conditions are forwarded to the destination selected for Forward w/o Conditions. |
| *5 |
If documents are received while paper is jammed, or paper or toner has run out, they are printed after the paper jam is cleared, paper is loaded, or toner is added. |
| *6 |
If [Delete Failed TX Jobs] in [Function Settings] (Settings/Registration) is set to 'Off', the status of any jobs with a forwarding error will be saved on the Status Monitor/Cancel screen. |
| *7 |
Documents with forwarding errors are handled as follows, depending on the settings for [Handle Files with Forwarding Errors] in [Function Settings] (Settings/Registration):
- [Always Print]: All documents with forwarding errors are printed.
- [Store/Print]: Documents with forwarding errors are stored in the Memory RX Inbox when Memory Lock is turned 'On'. If Memory Lock is turned 'Off', the documents are printed.
|
| *8 |
If <Fwd Done Notice> is specified in [Forwarding Settings] in [Function Settings] (Settings/Registration), a notification e-mail is sent when the forwarding job completes successfully. |
| *9 |
If <Fwd Done Notice> is specified in [Forwarding Settings] in [Function Settings] (Settings/Registration) and <Notice Only for Errors> is also specified, a notification e-mail is sent only when the document fails to be forwarded. |
| *10 |
The received fax/I-fax documents can be stored in the Confidential Fax Inbox the by specifying the Confidential Fax Inbox as the forwarding destination. Only the received documents that match the specified forwarding conditions can be stored in the Confidential Fax Inbox. |
|
