Settings/Registration > Function Settings > Send > Fax Settings > Remote Fax TX Settings
*
Remote Fax TX Settings

Return to Overview

To "Settings/Registration Table"

You can specify the settings to use the machine as the client-machine for Remote Fax.

For information on the optional products required to use this function, see "Optional Products Required for Each Function (imageRUNNER ADVANCE C9075 PRO/C9065 PRO)" or "Optional Products Required for Each Function (imageRUNNER ADVANCE C7065/C7055)."

  • Remote Fax TX Server Address

You can specify the IP address or the host name for the imageRUNNER ADVANCE series (Remote Fax Server) on the server-side.
To specify the IP address, you can register the IPv4 (Internet Protocol Version 4) address and IPv6 (Internet Protocol Version 6) address.

  • TX Timeout

If the TX Timeout time is set and the set time has elapsed, the remote fax job is canceled when the Remote Fax Server is not responding.

  • Number of Lines for Sending

You can set the number of lines you can select when sending remote fax. Set the number of lines to the same number of telephone lines connected to the remote fax server.

  • Setting the Priority Line

You can set the telephone line to use when sending a remote fax. If you set automatic selection for [Select Line] in [Options] or in the settings for a TX line registered in the Address Book, the set line is used for sending.

Remark
  • If Department ID Management is set on the remote fax server, you can perform sending by logging in to the remote fax client using a Department ID and password registered in the remote fax server.

  1. Press (Settings/Registration) → [Function Settings] → [Send] → [Fax Settings] → [Remote Fax TX Settings].
  • To specify the remote fax server address:
  • To specify the TX Timeout settings:
  • To select the number of lines to use for sending:
  • To select the priority line:

  • To specify the remote fax server address:
  • Press [Remote Fax Server Address].
  • Enter the host name or the IP address → press [OK].

A host name is a name assigned to a host computer that provides services on the network. Enter the name for Remote Fax Server.

  • To specify the TX Timeout settings:
  • Press [TX Timeout].
  • Specify the TX timeout time by pressing [-] or [+] → press [OK].

  • To select the number of lines to use for sending:
  • Press [No. of TX Lines].
  • Set the telephone line number to use for sending.

  • To select the priority line:
  • Press [Select Priority Line].
  • Select [Auto] or the line to use as a priority.

  • Back To Top