Return to Overview

To "Settings/Registration Table"

The Fax TX Report enables you to check whether documents were sent correctly to their intended destinations. A Fax TX Report can be printed automatically after the documents are sent. You can also set the machine to print a Fax TX Report only when a transmission error occurs, and adjust the Fax TX Report setting to print the first part of the document as part of the report to remind you of the document's contents.

For information on the optional products required to use this function, see "Optional Products Required for Each Function (imageRUNNER ADVANCE C9075 PRO/C9065 PRO)" or "Optional Products Required for Each Function (imageRUNNER ADVANCE C7065/C7055)."

• The reports can be printed only if 11" × 17", LGL, LTR, or LTRR (plain, recycled, thin, or color paper) is loaded in a paper source whose settings in [Other] in [Paper Drawer Auto Selection On/Off] in [Function Settings] (Settings/Registration) are set to 'On'. However, if [Consider Paper Type] for [Copy] is set to 'On' in [Paper Drawer Auto Selection On/Off], you cannot print from a paper source with color paper specified. (See "Setting the Paper Drawer Auto Selection On/Off")

• If TX Report in Output Report (Settings/Registration) is set to 'For Error Only' or 'On', a Send TX Report is printed with the Fax TX Report.

• If a sequential broadcast transmission is performed when Fax TX Report is set to On, a Fax Multi TX Report is printed.

• For an example of a Fax TX Report, see Chapter 17, "Appendix," in Getting Started.

1. Press (Settings/Registration) → [Function Settings] → [Send] → [Fax Settings] → [Fax TX Report].

2. Select [For Error Only], [On], or [Off].

• If you select [For Error Only] or [On]:

• If you select [Off]:

• If you select [For Error Only] or [On]:

• Select [On] or [Off] for <Report with TX Image> → press [OK].

<Report with TX Image>:

• If you select [Off]:

• Press [OK].

The Fax TX Report is not printed.

• Back To Top