Return to Overview

To "Settings/Registration Table"

ECM (Error Correction Mode) reduces the effect of system and line errors on documents that occur during sending or receiving with another fax machine that supports ECM. If the other machine does not support ECM, this setting is ignored. If transmission speed appears to be extremely slow, you may be able to speed up transmission time by turning ECM 'Off'.

For information on the optional products required to use this function, see "Optional Products Required for Each Function (imageRUNNER ADVANCE C9075 PRO/C9065 PRO)" or "Optional Products Required for Each Function (imageRUNNER ADVANCE C7065/C7055)."

• If you want to transmit using ECM, it is necessary that ECM Transmission be set in both the destination machine and this machine. This function does not operate unless ECM is set in both machines.

• Even when ECM is set, errors can sometimes occur due to a poor telephone line connection.

• If there is trouble with the line, it will take more time to send the documents.

1. Press (Settings/Registration) → [Function Settings] → [Send] → [Fax Settings] → [ECM TX].

2. Select [On] or [Off] → press [OK].

• Back To Top