Settings/Registration > Function Settings > Send > E-Mail/I-Fax Settings > Use Send Via Server
*
Use Send Via Server

Return to Overview

To "Settings/Registration Table"

You can determine whether you can select to send jobs via a server on the screen for specifying I-fax destination settings. To be able to select 'On' or 'Off' for <Send via Server> on the I-fax settings screen, set <Use Send Via Server> and <Allow Not via Server> to 'On' beforehand.

  1. Press (Settings/Registration) → [Function Settings] → [Send] → [E-Mail/I-Fax Settings] → [Use Send via Server].
  1. Select [On] or [Off] → press [OK].

Details of each item are shown below:

[On]: Enables you to set whether to use the Send Via Server setting as a condition to send to I-fax addresses.
[Off]: You cannot use the Send Via Server setting as a condition to send to I-fax addresses.
  • For I-fax, when <Send Via Server> is set to 'Off', even if you enter the maximum data size for sending, there is no size limit on the data that is sent.

  • Back To Top