Settings/Registration > Function Settings > Common > Generate File > Trace & Smooth Settings
*
Trace & Smooth Settings

Return to Overview

To "Settings/Registration Table"

You can change the recognition rate of line drawings of the original when creating a file with outline graphics.

For information on the optional products required to use this function, see "Optional Products Required for Each Function (imageRUNNER ADVANCE C9075 PRO/C9065 PRO)" or "Optional Products Required for Each Function (imageRUNNER ADVANCE C7065/C7055)."

Remark
  • This setting is disabled when sending via fax or I-fax.

  1. Press (Settings/Registration) → [Function Settings] → [Common] → [Generate File] → [Trace & Smooth Settings].
  1. Specify each setting → press [OK].

<Outline Graphics>:

[On]: Outlining of the graphics is performed.
[Off]: Outlining of the graphics is not performed.

<Graphics Recognition Level>:

[Normal]: Sets a standard recognition level. (The data size becomes small.)
[Moderate]: The recognition level and data size are in between those of [Normal] and [High].
[High]: Sets the highest recognition level. (The data size becomes large.)

<Background Image Level>:

[Data Size Priority]: The data size is small, but the background image quality is low.
[Normal]: The data size and background image quality are in between those of [Data Size Priority] and [Quality Priority].
[Quality Priority]: The data size is large, but the background image quality is high.
  • For <Graphics Recognition Level>, by increasing the recognition level, the data size becomes larger as well. It is recommended that you first use [Normal], and if desirable results are not obtained, to try increasing the recognition level in the order of [Moderate] and [High].

  • Back To Top