Return to Overview

To "Settings/Registration Table"

You can set the machine's printing priority. A job that belongs to a function with a higher set priority is printed after the job currently being processed is complete.

• Priority printing does not take place until the current job is complete. However, if the current job is paused, the printing of a job that belongs to a function with a higher set priority may start, depending on the settings.

1. Press (Settings/Registration) → [Function Settings] → [Common] → [Print Settings] → [Printing Priority].

2. Select the printing priority for the various functions → press [OK].

If you select [1] for a function, that function is given the highest printing priority.

If the fax board is not installed, [Receive] is displayed.

<Other> is used for setting the priority for printing reports.

PDL prints from MEAP applications are included in <Printer>. However, local print jobs from MEAP applications are included in <Access Stored Files>.

• If the same printing priority has been specified for multiple functions, printing starts with the first processed print job.

• Back To Top