Return to Overview

To "Settings/Registration Table"

You can set whether to output different sized papers to the same output tray of the finisher.

1. Press (Settings/Registration) → [Function Settings] → [Common] → [Paper Output Settings] → [Different Paper Sizes for Output Tray].

2. Select [On] or [Off] → press [OK].

If Different Paper Sizes for Output Tray is set to 'Off', and the message <Remove the paper from the output tray.> is displayed, printing stops. Remove all of the paper from the output tray, and printing resumes.

If both the Different Size Originals and Staple modes are set, outputs are stapled and collated, regardless of the Different Paper Sizes settings.

• Even if you set Different Paper Sizes for Output Tray to 'Off', different paper sizes are output to the same output tray in the same way as when Different Paper Sizes for Output Tray is set to 'On' when outputting to the Copy Tray-J1 or Buffer Pass Unit-G1.

• Even if you set Different Paper Sizes for Output Tray to 'Off', different paper size may be output to the same output tray if there is only a small amount of paper in the paper tray.

• Back To Top