Return to Overview

To "Settings/Registration Table"

If you are using the Collate, Offset Collate, or Staple mode, you can insert blank pages from a selected paper drawer to separate a specified number of copies.

• If you are using the Do not Collate, Rotate 90 Degrees Collate, Group, Offset Group, Booklet, or Saddle Stitch mode, job separation sheets cannot be inserted between copy sets.

1. Press (Settings/Registration) → [Function Settings] → [Common] → [Paper Output Settings] → [Job Separator between Copies].

2. Select [On] or [Off].

• If you select [On]:

• If you select [Off]:

• If you select [On]:

• Press [Change] → select the paper source for the sheet insertions → press [OK].

• Use - (numeric keys) to specify the number of pages after which a job separation sheet will be inserted.

• Press [OK].

• If you select [Off]:

• Press [OK].

• Back To Top