Settings/Registration > Adjustment/Maintenance > Adjust Action > Adjusting the Trimming Width
*
Adjusting the Trimming Width

Return to Overview

To "Settings/Registration Table"

This function enables you to adjust the trimming width of Saddle Stitch printouts in 0.04" (0.1 mm) increments for each paper size.

For information on the optional products required to use this function, see "Optional Products Required for Each Function (imageRUNNER ADVANCE C9075 PRO/C9065 PRO)."


Remark
  • [Adjust Trim width] can be adjusted if the Inner Trimmer-A1 is attached to the Booklet Finisher-A1.

  1. Press (Settings/Registration) → [Adjustment/Maintenance] → [Adjust Action] → [Adjust Trim width].
  1. Enter the trimming width using the keys on the touch panel display → [OK].

  • Back To Top