Return to Overview

To "Settings/Registration Table"

If you are using the Saddle Stitch mode of the Booklet Finisher, and you notice that the folds of the paper are not exactly in the middle of the booklet, you can make adjustments to the saddle stitch position to compensate for this error.

You can make adjustments to the folding position and stapling position at the same time.

For information on the optional products required to use this function, see "Optional Products Required for Each Function (imageRUNNER ADVANCE C9075 PRO/C9065 PRO)" or "Optional Products Required for Each Function (imageRUNNER ADVANCE C7065/C7055)."

• [Adjust Stitching Position] can be adjusted if the Booklet Finisher-A1 or Booklet Finisher-B1 is attached.

1. Press (Settings/Registration) → [Adjustment/Maintenance] → [Adjust Action] → [Change Stitching Position].

2. Select the paper size for which you want to adjust the saddle stitch position.

• Some of the paper sizes displayed may not be available in certain countries.

3. Press [] or [] to adjust the saddle stitch position → press [OK].

• Back To Top