Return to Overview

To "Settings/Registration Table"

You can reposition the stapler of the saddle stitcher unit after clearing a staple jam, or after replacing the staple cartridge. Saddle stitch staple repositioning works by feeding several sheets of paper into the saddle stitcher unit and stapling them together.

For information on the optional products required to use this function, see "Optional Products Required for Each Function (imageRUNNER ADVANCE C7065/C7055)."

• If transparencies are loaded in a paper drawer, make sure to pull out that paper drawer slightly so that transparencies are not fed for the saddle stitch staple repositioning procedure. Damage to the machine may occur if transparencies are fed during this procedure.

• Only use 12" × 18", 11" × 17", LGL, or LTRR paper for the saddle stitch staple repositioning procedure.

• Make sure to remove all output booklets from the Booklet Tray before performing the saddle stitch staple repositioning procedure.

• Paper that is required for the saddle stitch staple repositioning procedure is automatically fed to the saddle stitcher unit by the machine.

• [Saddle Stitcher Staple Repositioning] can be set if the Booklet Finisher-B1 is attached.

1. Press (Settings/Registration) → [Adjustment/Maintenance] → [Adjust Action] → [Saddle Stitcher Staple Repositioning].

2. Press [Start].

• Back To Top