Return to Overview

To "Settings/Registration Table"

• Make sure that you place the test pages properly. Accurate recalibrations of the gradation, density, and color settings of the machine cannot be made if the test pages are not scanned correctly.

• Four test pages are output by the machine during this adjustment. This machine adjusts the toner and print speed according to the paper type. To make effective adjustments, select the correct paper type.

• If Auto Adjust Gradation does not work well with heavy paper, print a test page with normal paper.

• Test pages are not counted as part of the copy or print total page counts.

1. Press (Settings/Registration) → [Adjustment/Maintenance] → [Adjust Image Quality] → [Auto Adjust Gradation].

2. Press [Full Adjust].

3. Select the type of paper to adjust → press [OK].

• This machine adjusts the toner and print speed according to the paper type. To make effective adjustments, select the correct paper type.

4. Press [Start Printing].

• If the paper which is appropriate for the test page is not loaded in a paper source, a message asking you to load the appropriate paper appear. In this case, load the appropriate paper in a paper source.

5. Place the first test page on the platen glass.

Place the test page face down on the platen glass, with the black band along the left edge of the platen glass.

6. Press [Start Scan].

7. Remove the first test page from the platen glass → press [Start Printing].

8. Place the second test page on the platen glass.

Place the test page face down on the platen glass, with the black bands along the top left back edge of the platen glass by the arrow.

9. Press [Start Scan].

10. Remove the second test page from the platen glass → press [Start Printing].

11. Place the third test page on the platen glass.

Place the test page face down on the platen glass, with the black bands along the top left back edge of the platen glass by the arrow.

12. Press [Start Scan].

13. Remove the third test page from the platen glass → press [Start Printing].

14. Place the fourth test page on the platen glass.

Place the test page face down on the platen glass, with the black bands along the top left back edge of the platen glass by the arrow.

15. Press [Start Scan].

16. Remove the fourth test page from the platen glass.

• Back To Top