Settings/Registration > Preferences > Timer/Energy Settings > Change Energy Saver Mode
*
Change Energy Saver Mode

Return to Overview

To "Settings/Registration Table"

The Energy Saver mode conserves energy by lowering the temperature of the fixing unit when the machine is not used for a prolonged period of time. You can set the machine to enter the Change Energy Saver Mode by pressing/ (Energy Saver) on the control panel. To reactivate the machine, press (Energy Saver) again. You can also press the control panel power switch to reactivate the machine.
You can set the energy saving level to -10%, -25%, -50%, or Zero Restore Time.

Energy Saving level Recovery Time
imageRUNNER ADVANCE C9075 PRO imageRUNNER ADVANCE C9065 PRO/C7065/C7055
-10% Approximately 30 seconds Approximately 40 seconds
-25% Approximately 40 seconds Approximately 60 seconds
-50% Approximately 90 seconds Approximately 100 seconds
Zero Restore Time Approximately 0 seconds Approximately 0 seconds

Remark
  • After deactivating the Energy Saver mode, the machine's recovery time may vary, depending on the energy saving level setting and the surrounding environment (i.e., temperature, humidity, etc.).

  1. Press (Settings/Registration) → [Preferences] → [Timer/Energy Settings] → [Change Energy Saver Mode].
  1. Select the desired energy saving level → press [OK].

If you want to be able to copy or print immediately, select [Zero Restore Time] (0%).

  • Back To Top