Return to Overview

To "Settings/Registration Table"

Setting the current date and time is very important. The current date and time settings are used as standard timer settings for functions that require them.

• You can also specify to automatically synchronize the date and time with a server on the network from the Settings/Registration screen. (See "Network.")

1. Press (Settings/Registration) → [Preferences] → [Timer/Energy Settings] → [Date/Time Settings].

2. Enter the current date (month, day, year) and time using - (numeric keys).

Enter the month and the day using four digits (including zeros).

Enter all four digits of the year, and the time in 24-hour notation, as four digits (including zeros) without a space.

Examples:

• If you make a mistake when entering values, press (Settings/Registration) → enter the values again, starting with the month.

• If you are setting the Time Zone:

• If you are setting Daylight Saving Time:

• If you are setting the Time Zone:

• Press the Time Zone drop-down list → select the time zone in which the machine is located.

• If you are setting Daylight Saving Time:

• Press [On] → [Start Date].

• Select the month and day from the Month and Day drop-down lists, respectively.

• Press [-] or [+] to enter the time of day you want Daylight Saving Time to take effect → press [OK].

• Press [End Date] → select the month, day, and time at which Daylight Saving Time ends → press [OK].

• If you set Daylight Saving Time, the machine automatically sets the standard time of the machine one hour forward at the specified date and time.

3. Press [OK].

• Back To Top