Return to Overview

To "Settings/Registration Table"

By registering the paper size and type as the default settings for the multi-purpose tray beforehand, you can use the multi-purpose tray as another paper source. This setting is useful if you always load the same paper size and type into the multi-purpose tray.

If the multi-purpose tray is registered as a paper source for the fax receiving, the paper loaded in the multi-purpose tray is always used for printing received faxes.

• When printing on special types of paper, such as heavy paper or transparencies, be sure to correctly set the paper type, especially if you are using heavy paper. If the type of paper is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a service repair, or the paper could jam.

• If you are using the multi-purpose tray as a paper source for copying, printing stored files, and receiving faxes, you must set so that the multi-purpose tray is eligible for the Paper Drawer Auto Selection. (See "Setting the Paper Drawer Auto Selection On/Off.")

1. Press (Settings/Registration) → [Preferences] → [Paper Settings] → [Register Multi-Purpose Tray Defaults].

2. Press [On] → [Register].

If you press [Off], proceed to step 5.

3. Select the desired paper size.

• If you want to select a standard paper size:

• If you want to select an irregular paper size:

• If you want to select an envelope size:

• If you want to select a standard paper size:

• Select the desired paper size → press [Next].

• To select an A or B series paper size, press [A/B-size].

• If you want to select an irregular paper size:

• Press [Custom Size].

• Enter the irregular paper size using the numeric keys on the touch panel display.

• Press [X] → enter a value.

• Press [Y] → enter a value.

• Press [OK].

• You can also select a size key ([S1] to [S5]) containing a stored paper size setting, instead of entering values.

• Press [Next].

• If you want to select an envelope size:

• Press [Envelope].

• Select the envelope type → press [OK].

• If the envelope type is not selected correctly, a paper jam will occur.

• Press [Next].

4. Select or make sure the desired paper type → press [OK].

• [Transparency] can be selected only if [LTR] is selected as the paper size.

• For more information on paper types, see "Basic Operations."

• You can register a paper type that is not listed in [Detailed Settings] in the Multi-Purpose Tray Settings: Selecting the Paper Type screen. For details on registering custom paper type, see "Registering/Editing Custom Paper Types."

5. Press [OK].

• Back To Top