Setting a Printer for Cascade Copying - Canon imageRUNNER ADVANCE 4251/4245/4235/4225 e-Manual

Setting a Printer for Cascade Copying

You can register a printer for cascade copying, and check the information for and delete registered printers.

You can register up to seven printers for cascade copying.

IMPORTANT
If <Use IPv4> in [IPv4 Settings] in [Preferences] (Settings/Registration) is set to 'Off' (see "TCP/IPv4 Settings"), you cannot register a cascade copy printer.

Press

(Settings/Registration).

Press [Function Settings] → [Copy] → [Register Remote Device for Cascade Copy].

To register a printer:

Press [Register].

Enter the IP address for the printer to register using

(numeric keys) → press [OK].

NOTE
Set the same Department ID and PIN as the machine for the cascade copy printer. (See "Specifying Department ID Management.")

To checking the information for a registered printer:

Select the cascade copy printer that you want to check → press [Details].

Check the information → press [OK].

You can update the information for the cascade copy printer by pressing [Obtain Information] when the printer is restarted.

To delete a registered printer:

Select the printer to delete → press [Delete].

Press [Yes].

NOTE
You cannot delete a cascade copy printer while cascade copying with the printer.

Press [Close].