Scanning Originals with Correct Orientation

When scanning from the feeder, you can set Network ScanGear to display the document in its correct orientation on the computer monitor.

Switch the scanner online → load the originals into the feeder → start Color Network ScanGear or Network ScanGear from the application.

For details, see "Scanning from the Feeder."

Set [Original Placement].

Using [Auto-adjust Orientation]:

Using [Orientation]:

Using [Auto-adjust Orientation]:

Select [Auto-adjust Orientation].

During scanning, the orientation of the original is detected automatically, and the scanned image is rotated if necessary, so that it is displayed correctly on the computer screen.

Using [Orientation]:

Click [Orientation].

Select the orientation of the originals to be loaded into the feeder for [Feeding Direction].

For 2-sided originals, also set [Book Opening] to indicate the relation between the front and back sides of a 2-sided original.

Click [OK].

NOTE
The window displayed may vary according to the operating system etc.

Category Top

System Requirements

Before Using the Network Scanner

Installation

Selecting the Scanner

Scanning Fundamentals

Switching the Scanner Online and Offline

Scanning from the Platen Glass

Scanning from the Feeder

Viewing the Online Help

Scanning Originals with Correct Orientation

Scanning Different Sized Originals Together

Specifying the Scanning Area

Department ID Management

Setting a Department ID and PIN Beforehand

Entering the Department ID and PIN When You Scan

Questions & Answers