e-Manual TopContentsHelpGlossary
Category
Top » Copy » Zoom by Length

Category Top

Overview of This Function

Flow of Copy Operations

Canceling a Copy Job

Reserved Copying

Copy Sample

Recalling Previous Copy Jobs (Previous Settings)

Storing, Recalling, and Deleting Favorite Settings (Favorite Settings)

Storing Favorite Settings

Recalling and Deleting Favorite Settings

Assigning Shortcuts

Changing and Canceling Copy Settings

Interrupt Mode

Changing Basic Copy Ratios

Zoom by Length

Setting the X and Y Axes Independently

Paper Selection

Book→2 Pages

Two-Sided Copying

Collating Copies

Booklet Mode

Job Build

N on 1

Add Cover

Inserting Sheets

Different Size Originals

Adjusting Density Manually

Adjusting Background Density

Selecting the Original Type

Inserting Sheets When Copying Onto Transparencies

Adding a Secure Watermark

Document Scan Lock

Page Numbering

Copy Set Numbering

Adjusting the Image Sharpness

Erase Frame

Watermark Printing

Date Printing

Shifting the Original Image

Gutter Mode

Print & Check

Inverting Images (Nega/Posi)

Repeat Images

Merge Job Blocks

Job Done Notice

Mirror Image

Store in Mail Box

Superimpose Image

Cascade Copy

Various Features of the Express Copy Basic Features Screen

Operating the Express Copy Basic Features Screen

Setting Shortcuts on the Express Copy Basic Features Screen

Appendix

Collapse all|Expand all
Zoom by Length
This mode enables you to enlarge or reduce originals by individually entering the dimensions of the original and copy paper. You can set a copy (zoom) ratio from 25% to 400% if you place the original on the platen glass, or from 25% to 200% if you place the original in the feeder.
1.
Press [Copy].
2.
Press [Copy Ratio] → [Set by Length].
3.
Select the horizontal and vertical copy ratio for the original size and copy size.
If you do not want to change the horizontal and vertical copy ratio, select [XY Same Ratio]. To change the copy ratio, select [XY Independent].
If you select [XY Same Ratio]:
If you select [XY Independent]:
If you select [XY Same Ratio]:
You can set the same copy (zoom) ratio for both the horizontal (X) and vertical (Y) axes.
Press [XY Same Ratio].
Press [Original Size] → enter a value.
Press [Copy Size] → enter a value.
You can enter the width or length of the original size. If you enter the width for the original size, make sure to enter the width for the copy size, and vice versa.
If you select [XY Independent]:
You can set different copy (zoom) ratios for the horizontal (X) and vertical (Y) axes.
Press [XY Independent].
Press [X] and [Y] for <Original Size> → enter each value.
Press [X] and [Y] for <Copy Size> → enter each value.
You can enter the width or length of the original size. If you enter the width for the original size, make sure to enter the width for the copy size, and vice versa.
4.
Press [OK].
The machine automatically calculates the correct copy (zoom) ratio based on the values you entered. However, the original image may be cut off slightly depending on the paper size.
IMPORTANT
For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart."
NOTE
The machine converts the specified sizes into a copy (zoom) ratio (%) using the following formula. The result is rounded to the closest integer.)
Copy (zoom) ratio (%) = (copy (data output) size/original size) x 100