Managing User Information - Canon imageRUNNER ADVANCE C3330i/C3325i e-Manual

Managing User Information

You can register and edit user data for authentication using Local Device Authentication. You can also import and export user data in bulk.

User Information Settings

Using the Touch Panel Display

Using the Remote UI

IMPORTANT
Only users with Administrator privileges can edit user information.

NOTE
It is recommended that you export the registered/edited user data to make a backup copy. User information can only be imported and exported from the Remote UI.

User Information Settings

Item	Setting Content	Setting Conditions	Default Setting
[User Name:]	Set user name when logging in.	Must be from 1 to 32 characters. You cannot include spaces or the following symbols (\ / : * ? l < > [ ] ; , = + @ ") Case sensitive. You cannot register a user name that has already been registered.	Administrator
[Password:]	Set password when logging in.	You can leave this blank or enter up to 32 characters. Case sensitive.	7654321
[Confirm:]	Enter the password you entered for [Password:].	You can leave this blank or enter up to 32 characters. Case sensitive.	7654321
[Department ID:]	To use authentication in conjunction with Department ID Management, set the Department ID.	Select a registered Department ID. For information on registering Department IDs, see "Specifying Department ID Management."	0000000
[PIN:]	Set PIN corresponding to Department ID.	You can leave this blank or enter up to 7 digits. (This can be omitted if Department ID Management is set to 'Off'). If the number you enter does not contain enough digits, zeros are added to the front of the number.	0000000
[Confirm:]	Enter the PIN you entered for [PIN:].	You can leave this blank or enter up to 7 digits. (This can be omitted if Department ID Management is set to 'Off'). If the number you enter does not contain enough digits, zeros are added to the front of the number.	0000000
[Displayed As:]	Set the user display name (for example, user's full name, user's department name, etc.)	You can leave this blank or enter up to 32 characters.	Administrator
[E-Mail Address:]	Set the user's e-mail address.	You can leave this blank or enter up to 256 characters and symbols. The format of e-mail addresses is not checked.	Blank
[Select Role to Set:]	Set the user role (privileges).	You can select a role that has been set. For details on each role, see "ACCESS MANAGEMENT SYSTEM Administrator Guide."	Administrator
[Card ID:]*	If the control card reader is attached, enter the card ID.	You can leave this blank or enter up to 8 characters. You cannot enter only zeros, such as <0000>.	Blank

*Indicates items that appear only when the control card reader is attached.

IMPORTANT
If [Department ID Management] is set to 'On', the registered information for Local Device Authentication and the registered user data and PIN in the machine's Department ID Management have to match. If the Department ID and PIN have been changed due to the delivery of device information, make sure to change the Local Device Authentication settings accordingly. If you are using Server Authentication + Local Device Authentication and set [Department ID Management] to 'On', you may not be able to log on. In this case, change the login service to DepartmentID Authentication → set [Department ID Management] to 'Off'. For instructions on setting a login service, see "Setting Application Authentication Information." The information registered for Local Device Authentication, and the user information and password registered for Department ID Management must match. If no e-mail address is registered, you need to set [Allow Unregistered Users to Send E-Mail] in [Function Settings] (Settings/Registration) to 'Off' to send e-mails/I-faxes. The login user name and e-mail address are displayed on the sender field ("from") on the e-mail recipient's machine. However, if an e-mail address that exceeds 194 characters is entered, only the first 193 characters of the address are displayed. The login user's e-mail address is displayed on the sender field on the I-fax recipient's machine.

IMPORTANT

If [Department ID Management] is set to 'On', the registered information for Local Device Authentication and the registered user data and PIN in the machine's Department ID Management have to match. If the Department ID and PIN have been changed due to the delivery of device information, make sure to change the Local Device Authentication settings accordingly.

If you are using Server Authentication + Local Device Authentication and set [Department ID Management] to 'On', you may not be able to log on. In this case, change the login service to DepartmentID Authentication → set [Department ID Management] to 'Off'. For instructions on setting a login service, see "Setting Application Authentication Information."

The information registered for Local Device Authentication, and the user information and password registered for Department ID Management must match.

If no e-mail address is registered, you need to set [Allow Unregistered Users to Send E-Mail] in [Function Settings] (Settings/Registration) to 'Off' to send e-mails/I-faxes.

The login user name and e-mail address are displayed on the sender field ("from") on the e-mail recipient's machine. However, if an e-mail address that exceeds 194 characters is entered, only the first 193 characters of the address are displayed.

The login user's e-mail address is displayed on the sender field on the I-fax recipient's machine.

NOTE
Multiple users can share the same Department ID. Multiple users with Administrator privileges can be registered. Enter the same string for [Password]/[PIN] and [Confirm]. If you enter a different string for [Password]/[PIN] and [Confirm], a message prompting you to re-enter the passwords/PIN appears.