Loading Preprinted Paper
When you load paper that has been preprinted with a logo, pay attention to the orientation of the paper regardless of whether you use the paper drawer or the multi-purpose tray. Load the paper properly so that printing is performed on the same side as the logo.
|
|
||||||||||||||||||||
When performing a copy operation, also pay attention to the orientation of the original documentPlace the original in the feeder with the side to copy face up, or place the original on the platen glass with the side to copy face down, as shown in the following illustrations.
Also, of the copy settings, make sure that <Original Content Orientation> is set correctly. Basic Copy Operations
|
 |
|
This section describes how to load preprinted paper with the proper orientation. For a description of the general procedure for loading paper in the paper drawer or multi-purpose tray, see Basic Paper Loading Method.
This section describes how to load preprinted paper when performing one-sided copying/printing. When performing two-sided copying/printing using preprinted paper, load paper by interpreting that the indications in this section referring to the facing of the paper mean the opposite.
If you set <Switch Feed Method> to <Print Side Priority>, pages will be printed on the proper side of preprinted paper in both two-sided and one-sided printing. In this case, load the paper the logo side face down in the paper drawer and the logo side face up in the multi-purpose tray. <Switch Feed Method>
|
Loading Paper with Logos in the Paper Drawer
The loading method varies depending on whether the orientation of the logo printed paper is portrait or landscape. Load the paper with the logo printed side (the side to print) face up, as shown in the following illustrations.
|
Portrait orientation paper
|
|
The printing results
|
 |
 |
 |
|
|
|
|
|
Landscape orientation paper (printing)
|
|
The printing results
|
 |
|
 |
|
|
|
|
|
Landscape orientation paper (copying)
|
|
The printing results
|
 |
|
|
Loading Paper with Logos in the Multi-Purpose Tray
The loading method varies depending on whether the orientation of the logo printed paper is portrait or landscape. Load the paper with the logo printed side (the side to print) face down, as shown in the following illustrations.
|
Portrait orientation paper
|
|
The printing results
|
 |
|
|
|
|
|
|
|
Landscape orientation paper (printing)
|
|
The printing results
|
 |
|
|
|
|
|
|
|
Landscape orientation paper (copying)
|
|
The printing results
|
 |
|
|