|
|
|
|
|
- Check the following.
- Select [PING COMMAND], enter the desired IPv6 address existing on the network, then press [OK].
- Select [HOST NAME], enter the machine's host name, then press [OK].
- If you set the startup time of the machine's network function by following the procedure in "Startup Time Settings," execute the PING command only after the time set as the startup time passes.
- If you connect the machine to a switching hub, the machine may not be able to connect to a network even though your network settings are appropriate. This problem may be resolved by delaying the startup of network communications for the machine. See "Startup Time Settings," for information on how to set up the startup time.
|