Startup Time Settings |
If you connect the machine to a switching hub, it may not be able to connect to a network even though your network settings are set correctly. This occurs because the spanning tree process performed between switching hubs prevents them from communicating with each other immediately after the machine connects to a switching hub. In this case, use the following procedure to delay the startup of network communication. |
Remark |
|
||||||
|
If the System Manager ID and System Password have been set, enter the System Manager ID and System Password using the numeric keys, then press [Log In/Out (ID)]. |
|
|
You can enter the value from 0 to 300 (seconds). |
|
Turn off the machine, wait at least 10 seconds, and then turn it on. |