|
|
|
|
|
- Set a destination address using the control panel.
Sample destination setting:
Server side settings:
Create a folder called Images within share, and then specify Images as the recipient for sending.
The machine's destination settings:
The Protocol drop-down list |
FTP |
[Protocol]: |
Windows (SMB) |
[Host Name]: |
¥¥swan¥share |
[User]: |
User name entered in above step. |
[Password]: |
Password for the above user. |
- If you use [Browse] to specify each item, press [Browse] after the expiration of the time specified in "Startup Time Settings." (the default setting startup time is <60 seconds>).
- A maximum of 120 alphanumeric characters can be entered for [Host Name] on the control panel. Also, a maximum of 120 alphanumeric characters can be entered for [File Path]. Enter each of these items on the server using no more than their allowable number of characters.
- If Language Switch in Common Settings is set to <On>, the Host Name and File Path of the file server destination may not be displayed correctly, so you may not be able to refer to them.
- If the language of the touch panel display differs from the computer used as a master browser, [Host name] and [File path] may not be displayed correctly, or you may not be able to browse the directories.
- You can send data using the following formats. A DNS server is required for the latter case:
¥¥192.168.2.100¥share
¥¥host_name.organization.company.com¥share
|