*
 
Settings from the Operation Panel

Return to Overview
Remark
  • To set the machine to a network with the LASER CLASS 810, an optional network printer kit is required.

You can select the printing method over a TCP/IP network.

 
     
  1. Press [Additional Functions].
 
     
  1. Press [] or [] to select <SYSTEM SETTINGS>, then press [OK].

If the System Manager ID and System Password have been set, enter the System Manager ID and System Password using the numeric keys, then press [Log In/Out (ID)].
 
     
  1. Press [] or [] to select <NETWORK SETTINGS>, then press [OK].
 
     
  1. Press [] or [] to select <TCP/IP SETTINGS>, then press [OK].
 
     
  1. Press [] or [] to select <LPD PRINT>, then press [OK].
 
     
  1. Press [] or [] to select <ON> or <OFF>, then press [OK].
<ON>: Uses LPD as the print application.
<OFF>: Does not use LPD.
 
     
  1. Press [] or [] to select <RAW PRINT>, then press [OK].
 
     
  1. Press [] or [] to select <ON> or <OFF>, then press [OK].
<ON>: Uses Raw as the print application.
<OFF>: Does not use Raw.
 
     
  1. Confirm that <USE BIDIRECTIONAL> is displayed, then press [OK].
 
     
  1. Press [] or [] to select <ON>, then press [OK].
<ON>: Establishes bidirectional communication using Port 9100.
<OFF>: Does not establish bidirectional communication using Port 9100.
 
     
  1. Press [Stop] to return to the standby mode.
 
       
  1. Restart the machine.

Turn off the machine, wait at least 10 seconds, and then, turn it on.

 
  • Back To Top